Hikity Android Double Din Car Stereo with GPS Navigation 9 Inch Touch Screen Radio Bluetooth FM Radio Receiver Support WiFi Connect Mirror Link for Phone with Dual USB Input + Backup Camera

Hikity 9 Inch Android Car Stereo

Specifications：

• Factory setting keyword: 8888
• System: Android 9.0
• Chipset: 8227L-DEMO
• RAM+Rom: 1GB+16GB
• Screen resolution: 1024*600
• Radio chip: NXP6851
• Power output: 4*45W
• Power amplifier chip: AC7315
• Audio format: APE/FLAC/WAV/MP3/WMA etc
• Video format: MKV/RMVB/AVI/MP4/MDV etc
• Picture format: PNG/JPEG/JPG/GIF/WBMP/BNP etc

Double Din Android Car Stereo with GPS Navigation

Double Din Stereo with GPS: Pre-installed offline map in Here WeGo, online navigation APPs can be downloaded.

• How to download offline map:

1. Car radio connected with stable wifi or hotspot
2. Enter into "Here WeGo" App - Menu - Download - Choose your country - Download
3. Support voice navigation via online or offline map. (Need to set up first)

Backup Camera Video Input

Waterproof Night Vision Backup Camera Inclueded

• 1. Camera's power cable: red and black.
• --- Red connect to reverse light positive, black to reverse light negative.
• 2. Camera's RCA cable: yellow port.
• ---- Insert into CAMIN port (yellow) on the radio
• 3. Trigger cable: cable named "reversing control" on the radio backside harness, according to the wiring diagram label on machine bottom. .
• --- Connect this cable to reverse light positive wire of the car.
• There are two short red wires next to the camera's RCA port.

3.1 end of the radio: the red wire 1 connects to the trigger cable

3.2 end of the reversing light: the red wire 2 connects to the reverse positive.

Notes: When you pull car's reverse gear, all functions of radio will suspend. Please do not worry this, it is parking safety priority, this android car radio will restart to work after parking finished.

• Package List: 1 x Android Car Stereo,1 x Rear View Camera,1 x Power Cable,1 x GPS Antenna,1 x Camera Input,1 x RCA Input and Output,2 x USB Cables, 2 x Metal Frames, 4 x Screws, 1 x Manual

Notes: The mini installation size is 7.0(L)*1.89(W)*3.93(H) Inch(2 DIN / 12V). Please check it whether it fits your car center console.

1. If you are using your own amplifier/sub, please check its power cables wiring:

If there are three power cables, "+", "-" and "REM", wiring:

"+" - battery positive

"-" - battery negative

"REM" - car ignition switch

2. If there is a problem that the machine cannot be turned on after installation, sincerely hope you can try just connect the below 3 wires.

-Red ACC wire connect to the car power wire(key wire) 12V

-Yellow B wire connect to the Battery of your car, (12V constant)

-Black GND wire connect to the ground.

And please test the radio with a 12V battery. (you only need to wire the 3 cables)

• If you have question about the car radio's package or operation (turning off, never power on, backup camera issue), please find our support soon!!!