2.4G Remote Instruction
I.Linking
1.Choose which channel you want to assign the light (Channel 1-4)
2.Switch on the light and short press one of the "Channel ON" buttons (Channel 1-4) one time within 3s ,when this link operation is successfully ,the light slowly blinks 3 times
Remark :Each light could only match with one channel with one remote ,one channel in one remote could control an endless numbers of light
II.Unlinking
1.Switch off the power of the light that you want to unlink
2.Switch on the light and short press one of "Channel ON"buttons with 3 times within 3s , when this unlink operation is successful ,the light fast blinks 5 times.
3.You could only finish the linking one by one ;As for unlinking ,you could do it one by one ,and also by one time , if you want to unlink all channels by one time ,switching off all the light power , then switching on and fast press "Master ON" button with 3 times within 3s , when all unlink operations are successfully , the all lights fast blink 5 times