Feature: Output power: 10W MAX(input voltage greater than or equal 3V)(eg: input 3.7V output 5V 2A) 15W MAX(input voltage greater than or equal 5V)(eg: input 5V output 12V 1.25A) 25W MAX(input voltage greater than or equal 12V)(eg: input 12V output 19V 1.3A) Efficiency: Up to 95% (the higher the input voltage, the higher the efficiency) Output ripple: 50mV (TYP) (20M) Bandwidth) Input 3.7V Output 5V 2A ripple 40mV Input 5V Output 12V 0.5A ripple 25mV Input 5V Output 12V 1.5A ripple 60mV Input 12V Output 24V 1A ripple 80mV Operating Temperature: Industrial (-40 ° c to +85 ° c)) (if ambient temperature exceeds 40° c, please lower power use, or to enhance heat dissipation) Full load temperature: 40 ° c Load regulation: ± 0.5% Voltage regulation: ± 0.5% Undervoltage protection: None Short circuit protection: None (Please Install fuses and protection circuits at Input port.) Input Reverse Polarity Protection: None (Please Series diode at the input port.) Connection: Welding, DIP-24 standard package can be soldered directly on PCB Input: IN+ input postive, IN- input negative Output: OUT+ output postive, OUT- output negative Boot mode: Power output directly. For shutdown, Just the EN pin connect to 5V level, after that the output voltage is approximately equal to the input voltage. Some Applications: DIY an adjustable power supply. one battery, and output 3-25V to power Phone, MP3, MP4, PSP etc. Package Include: 1x DC Boost Converter
This is a non-isolated step-up boost converter for DC to DC, made of the first class PCB.
Input voltage can be DC 2.5-25V and output voltage can be DC 5V to 25V which is continuously adjustable.
Input current is 4A max (input voltage greater than 3V), short 5A (less than 10 seconds).
It has a high converting efficiency which is up to 95% (the higher the input voltage, the higher the efficiency).
With Undervoltage protection and input reverse connection protection, please install fuse or protecting circuit when use it.
