BQLZR Stainless Steel Kitchen Adjustable Feet Round 2" Dia Furniture Leg Pack of 4

In stock
SKU
B00KQH8HMU
$17.43

Product Description

BQLZR

  • TWO CHOOSE(50MM and 104mm)
  • Material: stainless steel+plastic
  • Color: black+sliver
  • maximum adjustable height is about 15mm.
  • FOR 50mm Height

  1. Size: approx. 50 x 60 x 50mm/1.97 x 2.36 x 1.97"(Dia x W x H)
  2. Diameter: approx. 5cm/2"
  3. Note: Each leg load bearing is about 37.5 kg, 4 legs is about 150 kg, adjustable part is black plastic base

  • FOR 104mm Height

  1. Height:104mm/4"
  2. Diameter: 55mm/2.1"
  3. Square Length:68.3mm/2.7"
  4. Adjustable Height: Max. height 120mm/4.7",Mini. height 104mm/4"
  5. Note: Each leg load bearing is about 25 kg, 4 legs is about 100 kg, adjustable part is black plastic base

composition

  • Create a lot of space and storage location
  • The furniture feet can not only be used to raise the furniture, but also can be used as a support for the desktop partition to create a space for drawers
  • That is to lift a shelf unit a few inches off the ground so that it can be placed above the skirting board and installed in the small space between the wall and the radiator
  • maximum adjustable height is about 17mm.
  • The stainless steel material has a smooth design, you can paste your favorite drawings on the stainless steel part

Install

  • Product certification report
  • for,50mm ,4 legs is about 150 kg, for 104mm ,4 legs is about 100 kg
  • Although the stainless steel part is hollow, the stainless steel itself is very hard. Our product qualification certificate proves this, and the product has a long service life.
  • Adjustable feet are basically screw caps, you can completely unscrew them, but they are really easy to screw back.
  • It is not easy to slide during installation and can sink quickly and easily. They are perfect for use at home, office or workplace
  • Easy to install
  • 1. Prepare the installation tools ,Screwdriver and screws
  • 2. Mounting screws corresponding to the holes
  • 3, the installation is complete

Applicable scene

  • The product material is composed of stainless steel and plastic, It is an ideal choice for coffee tables, sofas, TV cabinets, beds, bathroom cabinets, office furniture, kitchens, cabinets, shelves, coffee tables, bedside tables, sofa side tables, etc.
  • Stainless steel material is easy to clean and does not change color for a long time
  • The lightweight design of stainless steel, even if the body bumps against the stainless steel furniture feet, there will be no pain or injury
  • Furniture feet can not only be used to raise furniture, but also can be used as a support for desktop partitions to create space as a drawer
  • The plastic part design will not wear your painted partitions or wooden floors
  • You can increase the number of furniture feet as needed
  • The amount of adjustment provided by the threaded rubber stop is sufficient to compensate for uneven floors

Product Quick Look

  • [Load-bearing] Each load-bearing capacity is 25KG, 4 of them have a total load-bearing capacity of 100KG, and the number can be added as needed. Although the stainless steel part is hollow, the stainless steel itself is very hard. Our product qualification certificate proves this. The service life of the product can reach fifteen years or more.
  • [Screws] The suitable screws for the furniture legs are M3.5x16mm, They are not included in the product
  • [Basic function] The amount of adjustment provided by the threaded rubber stop is sufficient to compensate for uneven ground It is an ideal choice for coffee tables, sofas, TV cabinets, beds, bathroom cabinets, office furniture, kitchens, cabinets, shelves, etc. It can also be used as a support for the desktop partition to create a drawer space They can adjust the height of the cabinet feet from 10CM to 11.5CM, which can blow out the debris under the cabinet
  • [Features] The plastic part design will not wear your painted partitions or wooden floors The lightweight design of stainless steel, even if the body bumps against the stainless steel furniture feet, there will be no pain or injury Smooth design of stainless steel material, you can paste your favorite drawings on the stainless steel part
  • [Note] 1,The furniture needs to be lifted instead of pushed and pulled when moving, which is beneficial to prolong the service life of the furniture feet2. Need to tighten the plastic thread part
Manufacturer ‎BQLZR
Part Number ‎N11345
Item Weight ‎14.4 ounces
Package Dimensions ‎4.8 x 4.76 x 4.33 inches
Country of Origin ‎China
Item model number ‎N11345
Is Discontinued By Manufacturer ‎No
Size ‎104mm
Color ‎Black
Material ‎Stainless steel
Shape ‎Round
Item Package Quantity ‎1
Included Components ‎Includes 4 leaves
Batteries Included? ‎No
Batteries Required? ‎No
Date First Available June 3, 2014
Write Your Own Review
You're reviewing:BQLZR Stainless Steel Kitchen Adjustable Feet Round 2" Dia Furniture Leg Pack of 4
Your Rating