AITRIP 3PCS DC 12V-36V Voltage Protection Module Digital Low Voltage Protector Disconnect Switch Over Discharge Protection Module Output 6-60V

Operation Instructions:

• Press "+" the LED displays the low voltage protection parameter. Hold on the "+" to enter setting manual to set the protection parameter
• Press "-" will display the difference value. Hold on the "-" to enter setting manual to set the difference value.

AITRIP digital battery over-discharge protection switch is specially designed for 12-36V lithium and lead-acid battery. This is a low voltage protection module, not included any battery. When the battery voltage reaches the setting values, the module will disconnect load automatically to prevent the battery from over-discharging so as to prolong the battery lifetime.

For example

• if you want the battery to stop outputting when the battery voltage is lower than 11V and re-output when it is over 11.6V. What should you need to do?
• Hold on "+" and set the value as 11. The LED starts flashing. After the flashing stops, hold on "-" and set the difference value as 0.6V
• Stop below 11V,voltage higher than 11.6V start？ Long press + screen slave flashing is set to 11,then long press - screen flashing set to 0.6 is OK.
• Is it lower than 12.5V and the voltage is higher than 14.8V? Long press + screen flashing to set the stop value to 12.5,wait for the screen to not flash,press and hold - the screen flashes,set the hysteresis voltage to 2.3V.